10KV Transformer Series

10kv level transformer implementation of national standards gb1094 "power transformer" and gb/t6451 "three-phase oil-immersed power transformer technical parameters and requirements", in the structure of the use of rolled iron core, high-stability coil support, improve the reliability of product operation.

1. Transformer core using imported high-quality cold-rolled silicon steel sheet stacked and become, greatly reducing no-load loss and no-load current, and the core is tied to ensure that the tightness of the core, reduce noise.

2. High and low voltage winding with oxygen-free copper winding, low voltage winding 500kva and the following double-layer cylindrical structure, 630kva or more than double spiral or four spiral structure, high-voltage winding multi-layer cylindrical structure.

3. The transformer linkage group adopts dyn11, which reduces the impact of harmonics on the power grid and improves the quality of power supply.

4. The transformer is fully sealed structure, prolonging service life, free of core lifting, free of maintenance.

5. The measured noise value is lower than the standard.

Send Mail

10KV Transformer Series Specification

10KV s13 Series Sealed Distribution Transformer

Type	Rated Capacity ( kVA)	Voltage combination			Connection symbol	NO-load Loss (kW)	load Loss (kW)	NO- load Curent , (%)	Short-circuit Impedance (%)
Type	Rated Capacity ( kVA)	HV	Tapping Rang of HV	LV	Connection symbol	NO-load Loss (kW)	load Loss (kW)	NO- load Curent , (%)	Short-circuit Impedance (%)
S13-M-30/10	30	6 6.3 10 10.5 11	±5% ±2x2.5%	0.4	Yyn11	0.08	0.6	2.3	4
S13-M-50/10	50					0.1	0.87	2
S13-M-63/10	63					0.11	1.04	1.9
S13 -M- 80/10	80					0.13	1.25	1.9
S13 -M-100/10	100					0.15	1.5	1.8
S13-M-125/10	125					0.17	1.8	1.7
S13-M-160/10	160					0.2	2.2	1.6
S13 -M -200/10	200					0.24	2.6	1.5
S13 -M -250/10	250					0.29	3.05	1.4
S13 -M -315/10	315					0.34	3.65	1.4
S13- M- 400/10	400					0.41	4.3	1.3
S13 -M -500/10	500					0.48	5.15	1.2
S13 -M -630/10	630					0.57	6.2	1.1	4.5
S13 -M -800/10	800					0.7	7.5	1
S13 -M-1000/10	1000					0.83	10.3	1
S13 -M-1250/10	1250					0.97	12	0.9
SS13-M-1600/10	1600					1.17	14.5	0.8

Type	Rated Capaciy (kVA)	Weight		Overall Dimenslon			Track Spacing
Type	Rated Capaciy (kVA)	OiL	Total	Long	Wide	High	Track Spacing
S13- M-30/10	30	70	330	880	540	860	400x 400
S13-M-50/10	50	75	415	900	550	930	400x400
S13 -M-63/10	63	80	465	930	580	970	400x 450
S13-M-80/10	80	85	520	950	610	1000	400x 450
S13- M-100/10	100	95	560	980	650	1030	400 x 450
S13-M-125/10	125	100	650	1000	700	1060	550x 550
S13-M-160/10	160	115	780	1100	730	1105	550x550
S13-M-200/10	200	130	880	1140	775	1150	550x 550
S13-M-250/10	250	135	990	1200	810	1170	550x 650
S13-M- 315/10	315	165	1160	1250	850	1250	550x 650
S13-M-400/10	400	195	1450	1300	880	1320	660 x 660
S13-M-50010	500	230	1680	1420	900	1430	660x 660
S13-M-630/10	630	305	2100	1600	930	1460	820x 820
S13- M- 80010	800	345	2580	1710	1020	1550	820x 820
S13 -M- 1000/10	1000	400	2850	1780	1070	1700	820x 820
S13-M-1250/10	1250	520	3750	1850	1070	1780	820x 820
S13-M-1600/10	1600	570	4050	2010	1230	1700	820 x 820

10KV SH15 Series Sealed amorphous alloy core distribution Transformer

Type	Rated Capacity ( kVA)	Voltage combination			Connection symbol	NO-load Loss (kW)	load Loss (kW)	NO- load Curent , (%)	Short-circuif Impedence (%)
Type	Rated Capacity ( kVA)	HV	Tapping Rang of HV	LV	Connection symbol	NO-load Loss (kW)	load Loss (kW)	NO- load Curent , (%)	Short-circuif Impedence (%)
S(B)H15-M-30/10	30	6 6.3 10 10.5 11	±5% ±2x2.5%	0.4	Dyn11	0.033	0.565	1.7	4
S(B)H15-M-50/10	50					0.043	0.820	1.3
S(B)H15-M-63/10	63					0.050	0.980	1.2
S(B)H15-M-80/10	80					0.060	1.180	1.1
S(B)H15-M-100/10	100					0.075	1.420	1.0
S(B)H15-M-125/10	125					0.085	1.700	0.9
S(B)H15-M-160/10	160					0.10	2.080	0.7
S(B)H15-M-200/10	200					0.12	2.455	0.7
S(B)H15-M-250/10	250					0.14	2.880	0.7
S(B)H15-M-315/10	315					0.17	3.445	0.5
S(B)H15-M-400/10	400					0.20	4.070	0.5
S(B)H15-M-500/10	500					0.24	4.870	0.5
S(B)H15-M-630/10	630					0.32	5.580	0.3	4.5
S(B)H15-M-800/10	800					0.38	6.750	0.3
S(B)H15-M-1000/10	1000					0.45	9.270	0.3
S(B)H15-M-1250/10	1250					0.53	10.80	0.2
S(B)H15-M-1600/10	1600					0.63	13.05	0.2
S(B)H15-M-2000/10	2000					0.75	15.66	0.2	5
S(B)H15-M-2500/10	2500					0.90	18.18	0.2	5

Type	Rated Capaciy (kVA)	Weight	Overall Dimenslon			Track Spacing
Type	Rated Capaciy (kVA)	Weight	Long	Wide	High	Track Spacing
S(B)H15-M-30/10	30	440	1000	780	810	400×400
S(B)H15-M-50/10	50	555	1030	850	850	400×400
S(B)H15-M-63/10	63	640	1000	900	845	400×450
S(B)H15-M-80/10	80	675	1060	900	900	400×450
S(B)H15-M-100/10	100	770	1110	910	920	400×450
S(B)H15-M-125/10	125	880	1170	910	950	550×550
S(B)H15-M-160/10	160	990	1220	910	985	550×550
S(B)H15-M-200/10	200	1150	1290	920	1025	550×550
S(B)H15-M-250/10	250	1310	1360	920	1060	550×650
S(B)H15-M-315/10	315	1515	1380	860	1165	550×650
S(B)H15-M-400/10	400	1870	1510	900	1240	660×660
S(B)H15-M-500/10	500	2185	1640	900	1295	660×660
S(B)H15-M-630/10	630	2720	1740	1120	1300	820×820
S(B)H15-M-800/10	800	3200	2070	1230	1345	820×820
S(B)H15-M-1000/10	1000	3640	2260	1350	1385	820×820
S(B)H15-M-1250/10	1250	4215	2360	1350	1445	820×820
S(B)H15-M-1600/10	1600	5000	2530	1390	1525	1070×1070
S(B)H15-M-2000/10	2000	5990	2750	1450	1650	1070×1071
S(B)H15-M-2500/10	2500	7095	2900	1510	1780	1070×1072

10Kv So Series Sealed Distribution Transformer

Type	Rated Capacity ( kVA)	Voltage combination			Connection symbol	NO-load Loss (kW)	load Loss (kW)	NO- load Curent , (%)	Short-circuif Impedence (%)
Type	Rated Capacity ( kVA)	HV	Tapping Rang of HV	LV	Connection symbol	NO-load Loss (kW)	load Loss (kW)	NO- load Curent , (%)	Short-circuif Impedence (%)
S9-M-30/10	30	6 6.3 10 10.5 11	±5% ±2x2.5%	0.4	Yyn0	0.13	0.6	2.3	4
S9-M-50/10	50					0.17	0.87	2
S9-M-63/10	63					0.2	1.04	1.9
S9-M-80/10	80					0.25	1.25	1.8
S9-M-100/10	100					0.29	1.5	1.6
S9-M-125/10	125					0.34	1.8	1.5
S9-M-160/10	160					0.4	2.6	1.4
S9-M-200/10	200					0.48	2.6	1.3
S9-M-250/10	250					0.56	3.05	1.2
S9-M-315/10	315					0.67	3.65	1.1
S9-M-400/10	400					0.8	4.3	1
S9-M-500/10	500					0.96	5.15	1
S9-M-630/10	630					1.2	6.2	0.9	4.5
S9-M-800/10	800					1.4	7.5	0.8
S9-M-1000/10	1000					1.7	10.3	0.7
S9-M-1250/10	1250					1.95	12	0.6
S9-M-1600/10	1600					2.4	14.5	0.6

Type	Rated Capaciy (kVA)	Weight		Overall Dimenslon			Track Spacing
Type	Rated Capaciy (kVA)	Oil	Total	Long	Wide	High	Track Spacing
S9-M-30/10	30	80	320	830	535	930	400x400
S9-M-50/10	50	91	400	1055	605	1000	400x400
S9-M-63/10	63	105	455	1055	605	1030	400×450
S9-M-80/10	80	115	525	1100	640	1100	400x450
S9-M-100/10	100	125	575	1150	675	1100	400x450
S9-M-125/10	125	157	690	1230	735	1120	550x550
S9-M-160/10	160	160	785	1230	735	1160	550x550
S9-M-200/10	200	175	910	1300	740	1185	550x550
S9-M-250/10	250	215	1110	1450	745	1340	550x650
S9-M-315/10	315	225	1200	1490	755	1340	550x650
S9-M-400/10	400	260	1490	1490	955	1360	660x660
S9-M-500/10	500	305	1670	1590	960	1350	660x660
S9-M-630/10	630	375	2030	1735	1085	1385	820x820
S9-M-800/10	800	500	2480	1735	1085	1470	820×820
S9-M-1000/10	1000	500	2730	1825	1170	1495	820X820
S9-M-1250/10	1250	620	3400	1825	1170	1760	820x820
S9-M-1600/10	1600	700	3920	2015	1225	1760	820x820

10KV S11 Series Sealed Distribution Transformer

Type	Rated Capacity ( kVA)	Voltage combination			Connection symbol	NO-load Loss (kW)	load Loss (kW)	NO- load Curent , (%)	Short-circuif Impedence (%)
Type	Rated Capacity ( kVA)	HV	Tapping Rang of HV	LV	Connection symbol	NO-load Loss (kW)	load Loss (kW)	NO- load Curent , (%)	Short-circuif Impedence (%)
S11-M-30/10	30	6 6.3 10 10.5 11	±5% ±2x2.5%	0.4	Yyn0	0.1	0.6	2.3	4
S11-M-50/10	50					0.13	0.87	2
S11-M-63/10	63					0.15	1.04	1.9
S11-M-80/10	80					0.18	1.25	1.8
S11-M-100/10	100					0.2	1.5	1.6
S11-M-125/10	125					0.24	1.8	1.5
S11-M-160/10	160					0.28	2.2	1.4
S11-M-200/10	200					0.34	2.6	1.3
S11-M-250/10	250					0.4	3.05	1.2
S11-M-315/10	315					0.48	3.65	1.1
S11-M-400/10	400					0.57	4.3	1
S11-M-500/10	500					0.68	5.15	1
S11-M-630/10	630					0.81	6.2	0.9	4.5
S11-M-800/10	800					0.98	7.5	0.8
S11-M-1000/10	1000					1.15	10.3	0.7
S11-M-1250/10	1250					1.36	12	0.6
S11-M-1600/10	1600					1.64	14.5	0.6

Type	Rated Capaciy (kVA)	Weight		Overall Dimenslon			Track Spacing
Type	Rated Capaciy (kVA)	Oil	Total	Long	Wide	High	Track Spacing
S11-M-30/10	30	75	315	1120	475	985	400x400
S11-M-50/10	50	90	410	945	550	1005	400x400
S11-M-63/10	63	100	460	965	555	1040	400x450
S11-M-80/10	80	105	505	975	630	995	400x450
S11-M-100/10	100	110	555	1105	635	1050	400x450
S11-M-125/10	125	125	650	1160	700	1075	550x550
S11-M-160/10	160	140	745	1225	715	1135	550x550
S11-M-200/10	200	150	850	1275	775	1150	550x550
S11-M-250/10	250	185	1020	1335	795	1220	550x650
S11-M-315/10	315	210	1200	1425	860	1335	550x650
S11-M-400/10	400	235	1415	1465	970	1425	660x660
S11-M-500/10	500	300	1665	1535	1005	1455	660x660
S11-M-630/10	630	370	2155	1845	1025	1640	820x820
S11-M-800/10	800	460	2565	1870	1015	1700	820x820
S11-M-1000/10	1000	505	2825	1880	1105	1745	820x820
S11-M-1250/10	1250	600	3575	1955	1120	1995	820x820
S11-M-1600/10	1600	720	4070	2215	1230	2010	820x820

Product Inquiry

Related Transformer Products

35KV Transformer Series

Three Phase Oil-Immersed Distribution Transformer

Three Phase OLTC Oil-Immersed Transformer

Other Transformer Applications

Substation

Wind Power Station